abu Pro Max?
- goneYAKcrazy
- TKF 1000 Club
- Posts: 1258
- Joined: Mon Jan 11, 2010 11:54 pm
- Location: cypress, tx / coles crossing 2011 Hobie Pro Angler, fully customized by gYc Boatwerkz
- Contact:
abu Pro Max?
so my gf got me this pro max for christmas and i need to clean it....im having a hard time getting the side covers off...ive searched for anything helping me.....can anyone help?
Re: abu Pro Max?
One word, HAMMER! Ok, two, HAMMER & SCREWDRIVER!
- Old Skool Hookers
- TKF 2000 club
- Posts: 2060
- Joined: Tue Dec 29, 2009 8:09 pm
- Location: Here I Be
Re: abu Pro Max?
check this site out to see if it helps
http://www.abu-garcia.com/product_schematic.php" onclick="window.open(this.href);return false;
http://www.abu-garcia.com/product_schematic.php" onclick="window.open(this.href);return false;
- goneYAKcrazy
- TKF 1000 Club
- Posts: 1258
- Joined: Mon Jan 11, 2010 11:54 pm
- Location: cypress, tx / coles crossing 2011 Hobie Pro Angler, fully customized by gYc Boatwerkz
- Contact:
Re: abu Pro Max?
bayfishing28 wrote:check this site out to see if it helps
http://www.abu-garcia.com/product_schematic.php" onclick="window.open(this.href);return false;
been there, no such luck
olsalty, are u serious about the hammer...should i just smash the reel or will it come apart
i had a fit trying to get the handle side cover off....she actually came over sat down and "POP" it came right off for her
Re: abu Pro Max?
I was just kidding about the hammer.
sometimes delicate hands do the trick.
sometimes delicate hands do the trick.
- goneYAKcrazy
- TKF 1000 Club
- Posts: 1258
- Joined: Mon Jan 11, 2010 11:54 pm
- Location: cypress, tx / coles crossing 2011 Hobie Pro Angler, fully customized by gYc Boatwerkz
- Contact:
Re: abu Pro Max?
or reading the instructions that came with the Ardent reel kleen kit. showed me a picture right there on it looked like the brake side cover just pivoted to open so i gave it a try.....hmmmmm why do we always just get in there without reading the d@mn instructions...i hope this thing still works when im done
- goneYAKcrazy
- TKF 1000 Club
- Posts: 1258
- Joined: Mon Jan 11, 2010 11:54 pm
- Location: cypress, tx / coles crossing 2011 Hobie Pro Angler, fully customized by gYc Boatwerkz
- Contact:
Re: abu Pro Max?
I finally figured it out. No corrosion and everything looked good. I cleaned it up and greased everything. Thanks guys. I wish there were disassembly instructions in the reel box
-
- Posts: 995
- Joined: Mon Apr 17, 2006 8:29 pm
- Location: West Houston
Re: abu Pro Max?
http://alantani.com/index.php?topic=16.0" onclick="window.open(this.href);return false;
This link shows you how to open up a Revo Inshore. Aside from some minor differences in specific parts (i.e. the number of roller bearings, braking system, etc), all of the Revos are fundamentally the same in construction and assembly. I have 3 Revos and they're all basically the same.
This site also has a whole lot of other threads, step-by-step pictures, etc that are very helpful for the DIY person.
This link shows you how to open up a Revo Inshore. Aside from some minor differences in specific parts (i.e. the number of roller bearings, braking system, etc), all of the Revos are fundamentally the same in construction and assembly. I have 3 Revos and they're all basically the same.
This site also has a whole lot of other threads, step-by-step pictures, etc that are very helpful for the DIY person.