Old town predator mk
-
- Posts: 9
- Joined: Sat Mar 17, 2018 5:07 pm
Old town predator mk
I recently got a old town predator mk and the rudder system to lift it up and down with the handle on the right side of the seat. Well I'm having problems on finding anything of how it's suppose to be rigged up through the pulley I was wondering if anyone had this problem or knew how to fix it.
- rbdavis3591
- Posts: 182
- Joined: Sat Sep 13, 2014 3:44 pm
- Location: North Austin
Re: Old town predator mk
Have you checked out Old Town's installation guides and videos?
https://www.youtube.com/watch?v=u87F6sebZSs
If needed I can take photos of my 2017 Predator MK rudder.
https://www.youtube.com/watch?v=u87F6sebZSs
If needed I can take photos of my 2017 Predator MK rudder.
-
- Posts: 9
- Joined: Sat Mar 17, 2018 5:07 pm
Re: Old town predator mk
Yeah I've seen that video but the problem I am having is that my is that the whole rudder system is inside the hull and I can't see anything
- rbdavis3591
- Posts: 182
- Joined: Sat Sep 13, 2014 3:44 pm
- Location: North Austin
Re: Old town predator mk
I would recommend you email Old Town that manufactures the kayak at feedback@oldtowncanoe.com and ask them your questions.Guyearnest wrote:Yeah I've seen that video but the problem I am having is that my is that the whole rudder system is inside the hull and I can't see anything
I have emailed Old Town several times with questions and just last week asked a question about mounting a HDSI transducer on the motor console. Old Town responded with several possibilities and then after reading my replies provided me a solution that worked great so that I get my side imaging.