keepin busy

Post Reply
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

keepin busy

Post by makenmend »

been out of town for couple weeks helping long time friend on house project.

So back home now, here's update on present projects.

1/ smaller planing outriggers to see if I can increase the speed of the Trimaran rig.
IMGP4199_resize.JPG
Attachments
IMGP4201_resize.JPG
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

2/ Completely new project. I want to try the Texas 200 and other such events, this is a proven design for this type of event and I should be able to manage single handed if required.
IMGP4194_resize.JPG
IMGP4194_resize.JPG (44.08 KiB) Viewed 8070 times
Side panels cut and planed to size
IMGP4190_resize.JPG
bottom panels cut and being bought to size, viewed from bow.
IMGP4189_resize.JPG
the design is the Core Sound 17'. she'll be an open boat at first, small cuddy may come later.
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

3/ A couple of Toto's for good buddies that did the Colorado freeze trip and enjoyed themselves. Can then make many more such trips :wink:
IMGP4175_resize.JPG
IMGP4180_resize.JPG
Attachments
IMGP4191_resize.JPG
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

fully goopied, getting to the glassing stage.
IMGP4185_resize.JPG
pre coated with thinned epoxy
IMGP4184_resize.JPG
glass laid out
IMGP4195_resize.JPG
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

Halfway saturated.
IMGP4197_resize.JPG
and all wetted out
IMGP4202_resize.JPG
next will be glassing inside, but still have decks and transom to do (could use more bench space :!: )

MM
Texmullet
Posts: 157
Joined: Wed Aug 17, 2005 2:36 am
Location: Pt. Neches

Re: keepin busy

Post by Texmullet »

You are a boat building machine! Thanks for posting your builds!!
User avatar
preacher
TKF 2000 club
TKF 2000 club
Posts: 2384
Joined: Wed Aug 15, 2007 8:56 am
Location: Winnie, Texas
Contact:

Re: keepin busy

Post by preacher »

Awesome work. Wish I could work at that speed.
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

Thanks folks, not so much speed as perserverance, and a touch of occupational therapy.

Also dosn't help that I'm addicted :roll:

MM

Preacher I think you may attest to the therapeutic aspect, as your good looking Honey Bee progress's.
User avatar
awoodman
Posts: 431
Joined: Tue Oct 19, 2010 10:36 am
Location: Bates city Mo.

Re: keepin busy

Post by awoodman »

Yep... a true addict :lol: ....Might try the skin-on-frame..opens up a whole new addiction...
http://www.texaskayakfisherman.com/foru ... &mode=view" onclick="window.open(this.href);return false;
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

awoodman, that thought has crossed my mind :twisted:

looked over a couple really nice SOF at the sail Oklahoma meet on Eufaula last October, no lack of desire, just space :(

MM
User avatar
bowgarguide
TKF 5000 Club
TKF 5000 Club
Posts: 5370
Joined: Mon Jan 15, 2007 7:52 pm

Re: keepin busy

Post by bowgarguide »

You sure do some pretty work,and yep you are hooked bad.
Ron
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

Ron
I'm in a 12 step program :mrgreen:

12 steps from my back porch to the SHOP.

Been gone again for a few days, starting up to relieve the withdrawl symptoms :P

MM
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

made some progress the last few days.
The outriggers (Ama's) now have decks,and hulls glassed today.
IMGP4235_resize.JPG
IMGP4239_resize.JPG
Glassed inside the Toto, did in 2 half sections so bottom is effectivly doubled.Bow done as seperate section.
IMGP4222_resize.JPG
IMGP4222_resize.JPG
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

Fore and aft decks, plus bulkheads made up.
IMGP4214_resize.JPG
IMGP4212_resize.JPG
3 coats epoxy to seal under decks.
IMGP4241_resize.JPG
User avatar
neon14
Posts: 501
Joined: Fri Mar 06, 2009 8:00 pm
Location: Center Point, Tx

Re: keepin busy

Post by neon14 »

Thats some great looking work! I cant help but to notice those outriggers in the first two picks look like tall, skinny, miniature jem paddle boards :D And those decks are beautiful, thats some of the nicest looking under decks I have ever seen!
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

Installed inwales,deck sub frames and bulheads.
IMGP4223_resize.JPG
Cutting inwale to rough size
IMGP4226_resize.JPG





[attachment=1]IMGP4231_resize.JPG[/attachment
Attachments
IMGP4231_resize.JPG
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

Very little movement on the 17'sailboat ( trying to free up space). Did get frames and temporary frames made up
IMGP4203_resize.JPG
Made a rolling tressle table for this build, for flexibility I added bolt on/off legs with 3 work heights. With double pully block and tackle either end, I can change out as required, or roll the entire assembly in/out the shop.
IMGP4219_resize.JPG
.

Thats a Laker 12' sitting on it with the legs at 32''
IMGP4237_resize.JPG
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

Early yesterday morning completed filleting in the bulkheads, rolled 3rd fill coat in main hull and both outriggers.

Goopie the frames
IMGP4247_resize.JPG
and strap the deck down
IMGP4248_resize.JPG
next day hurry up and wait for goopie to set real good :!: Nice day for a sail, spent the day running the rigging,for the new version trimaran with now finished outriggers.
IMGP4250_resize.JPG
running halyards ,sheets,blocks cleats,jam cleats,cam cleats, etc can eat a day up pretty fast, :roll: so the water test will have to be tommorow now

MM
User avatar
awoodman
Posts: 431
Joined: Tue Oct 19, 2010 10:36 am
Location: Bates city Mo.

Re: keepin busy

Post by awoodman »

Keepin busy...looks like a build-a-holic....creating a lot of nice work.. :)
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

Update, Well stiching up a smallish sailboat is a lot more work than any kayak I,'ve done :!:
2 days in total to go from 4 flat panels to a recognisable hull.
IMGP4284_resize.JPG
IMGP4285_resize.JPG
IMGP4289_resize.JPG
MM
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

And here's the hull ready for fillet's
IMGP4297_resize.JPG
another observation, doing the goopie work on this will suck up a ton more epoxy and wood flour :roll:
and it's way harder on an old back, but there's no quitting now
IMGP4307_resize.JPG
fillets done and seams taped
IMGP4317_resize.JPG
User avatar
awoodman
Posts: 431
Joined: Tue Oct 19, 2010 10:36 am
Location: Bates city Mo.

Re: keepin busy

Post by awoodman »

[quote="makenmend"]And here's the hull ready for fillet'sanother observation, doing the goopie work on this will suck up a ton more epoxy and wood flour :roll:
and it's way harder on an old back, but there's no quitting now.

Yea some of us are a glutton for punnishment...the mind is willing but the lower back is weak... :P
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

Yea some of us are a glutton for punnishment...the mind is willing but the lower back is weak...

To true, also lying on a hard dusty ( I need to clean ) concrete floor removeing wire stitches isn't fun either, then getting up at 2 am to smooth out the keel fillet you did at 8 pm , makes one wander about these addictions :roll:

MM
User avatar
makenmend
Posts: 636
Joined: Mon Jun 06, 2005 8:18 pm
Location: Longview E Tx

Re: keepin busy

Post by makenmend »

well the 1st of the 2 boats for my buddiies is now done and was cristened on a Brazos trip last month.
IMGP4356_resize.JPG


The 17' sailboat still moving, but slow, not so easy to turn over on ones own :!: Glassed one side then run short of cloth, sould be here monday, then turn again and start fitting out the inards.
IMGP4465_resize.JPG
IMGP4467_resize.JPG
Post Reply