Strip Stich @ glue Northwind
- gerald
- TKF 4000 Club
- Posts: 4174
- Joined: Thu Jun 12, 2003 10:48 am
- Location: Gatesville, tx www.theoldmansboats.com
Re: Strip Stich @ glue Northwind
We're going to have a stable of boats at the Roundup!
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Strip Stich @ glue Northwind
I didnt like the way the cockpits and decks came out so I sanded them back to raw wood.
Some days are like that
Ron
Some days are like that
Ron
Re: Strip Stich @ glue Northwind
That was one way to warm yourself up yesterday!
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Strip Stich @ glue Northwind
Ok I like that better,cloth and glass on the decks today .
More tomorrow.
Ron
More tomorrow.
Ron
Re: Strip Stich @ glue Northwind
Yea working in a greenhouse....Texmullet wrote:That was one way to warm yourself up yesterday!
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Strip Stich @ glue Northwind
That little tunnel has worked out well.
Ron
Ron
-
- TKF 2000 club
- Posts: 2424
- Joined: Sat Apr 12, 2008 8:42 pm
- Location: Guadalupe County
- Contact:
Re: Strip Stich @ glue Northwind
Just my humble opinion, but...it could pssibly suck in mid-July and August. Nice in the spring, thugh, and a clever idea.
Red
Red
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Strip Stich @ glue Northwind
Barditch
This was just a temporary fix until my shop goes up.
After these two boats and the hot weather on the way I plan to be camping and fishing not building.
Ron
This was just a temporary fix until my shop goes up.
After these two boats and the hot weather on the way I plan to be camping and fishing not building.
Ron
-
- TKF 2000 club
- Posts: 2424
- Joined: Sat Apr 12, 2008 8:42 pm
- Location: Guadalupe County
- Contact:
Re: Strip Stich @ glue Northwind
That makes perfect sense to me!bowgarguide wrote:Barditch
This was just a temporary fix until my shop goes up.
After these two boats and the hot weather on the way I plan to be camping and fishing not building.
Ron
Red
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
-
- TKF 2000 club
- Posts: 2424
- Joined: Sat Apr 12, 2008 8:42 pm
- Location: Guadalupe County
- Contact:
Re: Strip Stich @ glue Northwind
Slime and grime and cold frothy beer foam...Jeeze, it must be summer coming on!. You wouldn't dare cook a steak or two in a cast iron skillet over an open fire...would you??bowgarguide wrote:
Red
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Strip Stich @ glue Northwind
We are getting some shine now .
extra cloth laid on both ends.
Going to start looking like a keeper before long.
Ron
extra cloth laid on both ends.
Going to start looking like a keeper before long.
Ron
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Strip Stich @ glue Northwind
Barditch
Yep I have been known to and drink a salty dog while it was cooking. Chase them big ole gator gar tooooooooooooo
Ron
Yep I have been known to and drink a salty dog while it was cooking. Chase them big ole gator gar tooooooooooooo
Ron
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Strip Stich @ glue Northwind
I laid some extra cloth and glass in the cockpit then mounted my adjustable seat rails
Did some sanding and put the first finish coat on.
Want be to long before she gets wet.
Ron
Did some sanding and put the first finish coat on.
Want be to long before she gets wet.
Ron
- gerald
- TKF 4000 Club
- Posts: 4174
- Joined: Thu Jun 12, 2003 10:48 am
- Location: Gatesville, tx www.theoldmansboats.com
Re: Strip Stich @ glue Northwind
That's beautiful. I hope you've got the arrow pointing in the right direction...
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Strip Stich @ glue Northwind
Thats how I know which end is in the front.
Ron
Ron
Re: Strip Stich @ glue Northwind
Very nice! I'm ready for a paddle!!! And to be initiated properly on the Brazos w/a salty doggggg!! AND a big ole gar....and some cats,and ........well I'm just ready.....
Stacie tells everyone about her kayak and how much fun we had on the Llano. She is ready to plan anothe rtrip.
Stacie tells everyone about her kayak and how much fun we had on the Llano. She is ready to plan anothe rtrip.
Re: Strip Stich @ glue Northwind
Ron on my seat rails (in the Challenger) I never did attach any Velcro to secure the seat from sliding...It takes a lot of leg force to move the seat back...
http://www.texaskayakfisherman.com/foru ... &mode=view" onclick="window.open(this.href);return false;
The summer is coming on finally in Mo.getting hot..You going to build that TANDEM yet "you riverrat"...... or are you going to spend more time paddlin and fishin??
The mind is willing-wanting to build--but the water keeps calling in my case...
http://www.texaskayakfisherman.com/foru ... &mode=view" onclick="window.open(this.href);return false;
The summer is coming on finally in Mo.getting hot..You going to build that TANDEM yet "you riverrat"...... or are you going to spend more time paddlin and fishin??
The mind is willing-wanting to build--but the water keeps calling in my case...
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Strip Stich @ glue Northwind
Awoodsman
The reason I like my seat secured, if you turtle the seat will be there when you get back in and if I am really getting on the foot pegs I can slide it sometimes.
The Tandem should be my next boat, but it will depend on this boat. I think she will replace the T-V but if she doesnt ,there will be a ss@g t-v built first.
Ron
The reason I like my seat secured, if you turtle the seat will be there when you get back in and if I am really getting on the foot pegs I can slide it sometimes.
The Tandem should be my next boat, but it will depend on this boat. I think she will replace the T-V but if she doesnt ,there will be a ss@g t-v built first.
Ron
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Strip Stich @ glue Northwind
Seat mount finished and seat mounted.
I cant stand it any longer , I am fixing to weigh her and then get her wet
Then I will come back and finish her.
Ron
I cant stand it any longer , I am fixing to weigh her and then get her wet
Then I will come back and finish her.
Ron
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Strip Stich @ glue Northwind
54 lbs ready to float, not bad for a 17 ft 2 inch boat.
Water is coming shortly.
Ron
Water is coming shortly.
Ron
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Strip Stich @ glue Northwind
I loaded her up and headed to the local lake
Dont look half bad
Unloaded and shoved her in the water ,dang she floats shallow , with a small cooler seat and camera bags both ends are out of the water
We need some rain bad here are a few pics of the shore line
I crawled in and shoved off , rocked and rolled sideways ,dang boat is like a rock
I had my seat up 5 inches ,I am going to raise it a couple more the next time I go
The initial stability is great , leaned her on over and it was like hitting a wall,
OH I LIKE IT
Started out across the lake and started turning back and fourth , she doesnt need a rudder , that was one of my concerns.
This is not a sprint boat , got it up to just a little over 5 miles an hour. killing yourself might do 6 for a short time. But oh the cruise speed, my T-V cruises at 3.75 mph this boat can be paddled all day at 4.2 to 4.5 I love it.
This was on a lake with a chop , balanced decks worked great the wind just didnt bother me at all . in fact I turned side ways to the wind and let her drift she
she stayed that way no weather cocking.
I have built some fast boats that can out sprint this one ,but at the end of the day I think they would be playing catch up.
My thoughts on the North Wind , it exceed my expectations .
Rudder not needed
high cruise
I think I need at least a hundred more lbs in her to really see her perform I hate to say it but I think the T-V just got demoted to second place.
Still a lot to do to her ,but now I know she is a winner.
Matt thanks for a great design.
Ron
Dont look half bad
Unloaded and shoved her in the water ,dang she floats shallow , with a small cooler seat and camera bags both ends are out of the water
We need some rain bad here are a few pics of the shore line
I crawled in and shoved off , rocked and rolled sideways ,dang boat is like a rock
I had my seat up 5 inches ,I am going to raise it a couple more the next time I go
The initial stability is great , leaned her on over and it was like hitting a wall,
OH I LIKE IT
Started out across the lake and started turning back and fourth , she doesnt need a rudder , that was one of my concerns.
This is not a sprint boat , got it up to just a little over 5 miles an hour. killing yourself might do 6 for a short time. But oh the cruise speed, my T-V cruises at 3.75 mph this boat can be paddled all day at 4.2 to 4.5 I love it.
This was on a lake with a chop , balanced decks worked great the wind just didnt bother me at all . in fact I turned side ways to the wind and let her drift she
she stayed that way no weather cocking.
I have built some fast boats that can out sprint this one ,but at the end of the day I think they would be playing catch up.
My thoughts on the North Wind , it exceed my expectations .
Rudder not needed
high cruise
I think I need at least a hundred more lbs in her to really see her perform I hate to say it but I think the T-V just got demoted to second place.
Still a lot to do to her ,but now I know she is a winner.
Matt thanks for a great design.
Ron
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Strip Stich @ glue Northwind
Did a little rigging on the NW today ,
Jacked the seat up to 8 inches
I will try that height out tomorrow .
Drilled holes for my rod holders and trolling holders
Trolling or drifting they will be in this position.
Transporting like this
I like the rods in front of me so I can see if they snag on anything.
Ron
Jacked the seat up to 8 inches
I will try that height out tomorrow .
Drilled holes for my rod holders and trolling holders
Trolling or drifting they will be in this position.
Transporting like this
I like the rods in front of me so I can see if they snag on anything.
Ron
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Strip Stich @ glue Northwind
The 8 inch seat height worked great , rod holder also worked well and the 52 quart ice chest fit in front of me just right for access .
So far everything is coming up roses on this boat, I think I could stand in her , might have to try that.
I sat back and kicked my feet up on top of the cooler and just relaxed ,she was still stable as heck.
I am disappointed in one thing about this boat
I cant think of a single thing that I can improve on , first time I dont have the itch to build another boat . sort of feels funny.
Ron
PS She is a good fishing platform to
So far everything is coming up roses on this boat, I think I could stand in her , might have to try that.
I sat back and kicked my feet up on top of the cooler and just relaxed ,she was still stable as heck.
I am disappointed in one thing about this boat
I cant think of a single thing that I can improve on , first time I dont have the itch to build another boat . sort of feels funny.
Ron
PS She is a good fishing platform to
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Strip Stich @ glue Northwind
Took the NW for another stroll a couple days ago , slimed her a little more .
The 8 inch seat height is still as stable as a rock and super comfortable.
The rod holders worked great.
It was very windy ,lake white capping and she just plowed on through ,no hull slap and the wind didnt seem to bother her much.
If someone tells you that you need a short boat to fish creeks , dont believe them I ran up in a creek a long ways and turned her around , creek was about 18 ft wide ,no problem.
I am still a happy camper with this boat.
Ron
The 8 inch seat height is still as stable as a rock and super comfortable.
The rod holders worked great.
It was very windy ,lake white capping and she just plowed on through ,no hull slap and the wind didnt seem to bother her much.
If someone tells you that you need a short boat to fish creeks , dont believe them I ran up in a creek a long ways and turned her around , creek was about 18 ft wide ,no problem.
I am still a happy camper with this boat.
Ron