Epoxy/ Graphite/ Silica
- traveling man
- Posts: 207
- Joined: Sun Jun 14, 2009 4:36 pm
- Location: Burleson, TX
Epoxy/ Graphite/ Silica
Can anyone discuss the merits (or not) of coating the bottom with epoxy/ graphite, also I hear mention that if you add Coloidal Silica (Cabosil) to your mixture that this adds a lot of durability to the concoction. I am going to build, or at least try to build a cedar strip kayak later this year that will be used on the upper Brazos river (lots of rocks). Will this make the bottom more durable or will the damage just not show as bad?
Re: Epoxy/ Graphite/ Silica
I read a page with pics a couple of days ago explaining how graphite helps to prevent bad scratches on the epoxy finish. Actually makes the bottom 'slippery'. One pic showed a scratch on the clear epoxy finish and it turned into a smudge when it crossed onto the graphite finish. Help rocks to slide across the finish where the epoxy tends to 'grab' the rock and thus causes a scratch.
Search 'epoxy graphite' and a couple of different articles will be in there somewhere. I am currently looking for powdered graphite locally for a similar need.
Search 'epoxy graphite' and a couple of different articles will be in there somewhere. I am currently looking for powdered graphite locally for a similar need.
- gerald
- TKF 4000 Club
- Posts: 4174
- Joined: Thu Jun 12, 2003 10:48 am
- Location: Gatesville, tx www.theoldmansboats.com
Re: Epoxy/ Graphite/ Silica
Graphite impregnated epoxy works by providing a sacrificial surface for rocks, stumps, logs, stobs, etc. to slide off easier. And it does work. A matt black finish rather than the shiny black is preferred. You expect this coating to eventually wear off and/or need to be resurfaced. I use to do it after every marathon race...almost.
Adding silica is different. This provides a slightly harder, slightly more durable surface, but it does not make the surface slippery.
For the materials to be used in combination it would be best to use silica in a fill coat with subsequent coats being graphite filled. A graphite impregnated coating is NOT a fill coat. It goes on after the fill coats.
Adding silica is different. This provides a slightly harder, slightly more durable surface, but it does not make the surface slippery.
For the materials to be used in combination it would be best to use silica in a fill coat with subsequent coats being graphite filled. A graphite impregnated coating is NOT a fill coat. It goes on after the fill coats.
Re: Epoxy/ Graphite/ Silica
Progressive Epoxy offer telflon powder now, which sounds promising. However, I haven't heard of any feedback on it's effectiveness.
- gerald
- TKF 4000 Club
- Posts: 4174
- Joined: Thu Jun 12, 2003 10:48 am
- Location: Gatesville, tx www.theoldmansboats.com
Re: Epoxy/ Graphite/ Silica
Teflon powder. Hmmm--I'll have to try that. It's worth a shot. Maybe test it along side some graphite impregnated epoxy.
Re: Epoxy/ Graphite/ Silica
It's worth taking a look at. Maybe you could do zebra stripes on the bottom of the hull.
Re: Epoxy/ Graphite/ Silica
Does the graphite rub off on hands or clothes?
- gerald
- TKF 4000 Club
- Posts: 4174
- Joined: Thu Jun 12, 2003 10:48 am
- Location: Gatesville, tx www.theoldmansboats.com
Re: Epoxy/ Graphite/ Silica
No, it does not. When you sand it you can get a little on your hands, clothes...hair, eyebrows, etc.. Just funning. It's little worse than normal sanding dust.Piscator wrote:Does the graphite rub off on hands or clothes?
- traveling man
- Posts: 207
- Joined: Sun Jun 14, 2009 4:36 pm
- Location: Burleson, TX
Re: Epoxy/ Graphite/ Silica
Thanks for the info, trying to learn all I can before the build. So it goes (glass---epoxy---epoxy/ silica---epoxy/ graphite). Has anyone used Kevlar cloth on the bottom for more durability, or is this just overkill?
- gerald
- TKF 4000 Club
- Posts: 4174
- Joined: Thu Jun 12, 2003 10:48 am
- Location: Gatesville, tx www.theoldmansboats.com
Re: Epoxy/ Graphite/ Silica
E-glass is the standard glass for layup. Let's, for example, say that e-glass costs $100. Then s-glass would cost $200. Kevlar would cost $400. And carbon fiber would cost $800.
So...it's not a question of whether or not kevlar is overkill. It may not be, but it's expensive. It's also opaque and yellow--meaning you won't see the wood if that's what you're after. Have I used kevlar and carbon fiber? Sure, but only in special circumstances.
So...it's not a question of whether or not kevlar is overkill. It may not be, but it's expensive. It's also opaque and yellow--meaning you won't see the wood if that's what you're after. Have I used kevlar and carbon fiber? Sure, but only in special circumstances.
- preacher
- TKF 2000 club
- Posts: 2385
- Joined: Wed Aug 15, 2007 8:56 am
- Location: Winnie, Texas
- Contact:
Re: Epoxy/ Graphite/ Silica
Floors, walls, kids, pets, furniture, steering wheel . . .gerald wrote:No, it does not. When you sand it you can get a little on your hands, clothes...hair, eyebrows, etc.. Just funning. It's little worse than normal sanding dust.Piscator wrote:Does the graphite rub off on hands or clothes?