pics of a chain rigged Bruce anchor

Post Reply
hogginhank
Posts: 309
Joined: Mon May 08, 2006 10:44 pm
Location: New Braunfels TX

pics of a chain rigged Bruce anchor

Post by hogginhank »

How many feet and how do ya'll rig a bruce with chain. I'm guessing you connect to the small hole and use a small zip tie to attatch it to the other for break away purposes??

I really guess I would like to know how many feet of chain. Thanks..Hank
habanerojooz
Posts: 995
Joined: Mon Apr 17, 2006 8:29 pm
Location: West Houston

Re: pics of a chain rigged Bruce anchor

Post by habanerojooz »

This is how much chain that I have on my Bruce claw anchor. I bought the chain and clevis pin at Lowes and I use two small zip ties. This is what it looks like.
Attachments
IMGP0082.JPG
hogginhank
Posts: 309
Joined: Mon May 08, 2006 10:44 pm
Location: New Braunfels TX

Re: pics of a chain rigged Bruce anchor

Post by hogginhank »

thanks for the pic. Does that little bit of chain make a difference??
habanerojooz wrote:This is how much chain that I have on my Bruce claw anchor. I bought the chain and clevis pin at Lowes and I use two small zip ties. This is what it looks like.
habanerojooz
Posts: 995
Joined: Mon Apr 17, 2006 8:29 pm
Location: West Houston

Re: pics of a chain rigged Bruce anchor

Post by habanerojooz »

hogginhank wrote:thanks for the pic. Does that little bit of chain make a difference??
The chain does a couple of things which are probably insignificant, but I put the chain on long ago and I'm going to leave it on there. The chain adds a little bit of weight to the anchor and the chain will break through the zipties easier when needed.

If you don't go with the chain, you'll still find the clevis pin useful for attaching the rope to. If you get stuck and need to break through the zipties, the clevis pin will swivel up and allow the anchor to be pulled straight up out of a snag.
hogginhank
Posts: 309
Joined: Mon May 08, 2006 10:44 pm
Location: New Braunfels TX

Re: pics of a chain rigged Bruce anchor

Post by hogginhank »

sweet. I guess I'm going to try that..It seems bullet proof..I appreciate your time and pics..Adios' for now..Hank
habanerojooz wrote:
hogginhank wrote:thanks for the pic. Does that little bit of chain make a difference??
The chain does a couple of things which are probably insignificant, but I put the chain on long ago and I'm going to leave it on there. The chain adds a little bit of weight to the anchor and the chain will break through the zipties easier when needed.

If you don't go with the chain, you'll still find the clevis pin useful for attaching the rope to. If you get stuck and need to break through the zipties, the clevis pin will swivel up and allow the anchor to be pulled straight up out of a snag.
User avatar
johnny a
TKF 1000 Club
TKF 1000 Club
Posts: 1636
Joined: Thu Jul 27, 2006 9:14 pm
Location: LaPorte
Contact:

Re: pics of a chain rigged Bruce anchor

Post by johnny a »

habanerojooz wrote:
hogginhank wrote: If you get stuck and need to break through the zipties, the clevis pin will swivel up and allow the anchor to be pulled straight up out of a snag.
I wish three of my bruce claws knew this. LOL Some of the places I anchor my zip ties broke but the anchor was stuck then donated to become fishing structure. :lol: :lol: :lol:
DSmithla
Posts: 747
Joined: Sat Apr 19, 2008 5:12 pm

Re: pics of a chain rigged Bruce anchor

Post by DSmithla »

I've seen another way of rigging the anchor where you tie (use good knots) a length of line between the top hole and the bottom hole on the anchor. Before you secure the line you put a steel ring (like for an anchor trolley, only smaller) on it, so that the ring can slide up and down the line, from the bottom to the top of the anchor. You attach your length of chain to anchor line on one end and to the ring (on the anchor) on the other.

The purpose of the chain is supposed to be to help keep the anchor line at a less steep angle (relative to the bottom you're anchored on) so that wave action will be less likely to pry the anchor up (picture the line laying on the bottom of the bay as opposed to going straight up and down like your fishing line when you fish a deep offshore reef).

I don't know if that chain that on the anchor below the zip tie is contributing much, other than adding overall weight to the anchor. Of course, zip tied along the shaft like that, the chain will be much less of a hassle in the yak.

Oh yeah, if you can't get your anchor up, you just paddle upwind/upcurrent until the ring slides to the bottom of the anchor, and, wallah!!!!. I've never tried this with a Bruce claw, but it works with Danforths.
habanerojooz
Posts: 995
Joined: Mon Apr 17, 2006 8:29 pm
Location: West Houston

Re: pics of a chain rigged Bruce anchor

Post by habanerojooz »

johnny a wrote:
habanerojooz wrote:
hogginhank wrote: If you get stuck and need to break through the zipties, the clevis pin will swivel up and allow the anchor to be pulled straight up out of a snag.
I wish three of my bruce claws knew this. LOL Some of the places I anchor my zip ties broke but the anchor was stuck then donated to become fishing structure. :lol: :lol: :lol:
The clevis pin has great utility value in this situation. The bruce claw is very effective, sometimes too effective. :)

The key also is to make sure you are directly above your anchor when you break the zipties. This ensures that your are pulling up vertically and it lets the clevis pin do its job. Think of it as your contribution to the habitat for barnacles and the oysters. :D
habanerojooz
Posts: 995
Joined: Mon Apr 17, 2006 8:29 pm
Location: West Houston

Re: pics of a chain rigged Bruce anchor

Post by habanerojooz »

DSmithla wrote:...
Oh yeah, if you can't get your anchor up, you just paddle upwind/upcurrent until the ring slides to the bottom of the anchor, and, wallah!!!!. I've never tried this with a Bruce claw, but it works with Danforths.
Danforth anchors have a ring which slide up and down on the anchor. Your description of creating your own sliding ring on an anchor is similar to the built in function of the Danforth sliding ring. The 1K Bruce claw does not have big holes to run rope through and tie knots for this sliding ring. I guess you could use 2 clevis pins for this purpose.

With a Bruce claw and ziptie/clevis pin setup, you can pull on the anchor rope until you're almost vertical above the anchor, and then yank to break the zipties. Once you break the zipties, you are immediately pulling from the clevis without having to move upstream of the snag.

With a Danforth you need to put yourself upstream of the snag to get the ring to move to the other end of the anchor. When there is current and wind, paddling upstream in a kayak, while negotiating the anchor rope to move the ring, is not an easy thing to do. I also have a Danforth anchor but I've never had it stuck before. I hope I never get it stuck with a Danforth while in a heavy current.
DSmithla
Posts: 747
Joined: Sat Apr 19, 2008 5:12 pm

Re: pics of a chain rigged Bruce anchor

Post by DSmithla »

habanerojooz wrote:
DSmithla wrote:...
Oh yeah, if you can't get your anchor up, you just paddle upwind/upcurrent until the ring slides to the bottom of the anchor, and, wallah!!!!. I've never tried this with a Bruce claw, but it works with Danforths.
Danforth anchors have a ring which slide up and down on the anchor. Your description of creating your own sliding ring on an anchor is similar to the built in function of the Danforth sliding ring. The 1K Bruce claw does not have big holes to run rope through and tie knots for this sliding ring. I guess you could use 2 clevis pins for this purpose.

With a Bruce claw and ziptie/clevis pin setup, you can pull on the anchor rope until you're almost vertical above the anchor, and then yank to break the zipties. Once you break the zipties, you are immediately pulling from the clevis without having to move upstream of the snag.

With a Danforth you need to put yourself upstream of the snag to get the ring to move to the other end of the anchor. When there is current and wind, paddling upstream in a kayak, while negotiating the anchor rope to move the ring, is not an easy thing to do. I also have a Danforth anchor but I've never had it stuck before. I hope I never get it stuck with a Danforth while in a heavy current.

Excellent point.
cheapsk8
Posts: 935
Joined: Tue Apr 03, 2007 10:34 pm
Location: Houston - In life as in baseball, it is the number of times you reach home safely that count.

Re: pics of a chain rigged Bruce anchor

Post by cheapsk8 »

Here is a picture from Team Ocean Kayak's web site http://www.teamoceankayak.com/" onclick="window.open(this.href);return false;

Image
habanerojooz
Posts: 995
Joined: Mon Apr 17, 2006 8:29 pm
Location: West Houston

Re: pics of a chain rigged Bruce anchor

Post by habanerojooz »

cheapsk8 wrote:Here is a picture from Team Ocean Kayak's web site http://www.teamoceankayak.com/" onclick="window.open(this.href);return false;

Image
Excellent shot. I should have said that 'my' bruce claw doesn't have holes big enough. :-) On my 1K anchor, the rear hole is big enough but I recall that the front hole is small. Thanks for the photo.
User avatar
length
Posts: 476
Joined: Sat Mar 21, 2009 5:22 pm
Location: Opinions are like rear ends every one has one and they all stink from time to time!

Re: pics of a chain rigged Bruce anchor

Post by length »

I drilled mine out then put on a thick coat of paint. When it starts to rust I hit it with a wire brush and paint again. I am using the chain and ziptie method.
User avatar
W5CDS
TKF 1000 Club
TKF 1000 Club
Posts: 1445
Joined: Fri Aug 22, 2008 10:46 am
Location: Granite Shoals (Lake LBJ)

Re: pics of a chain rigged Bruce anchor

Post by W5CDS »

length wrote:I am using the chain and ziptie method.
x2, although I use a little more chain (about 30" - keeps the bruce's nose down so it buries in the bottom a little easier).
User avatar
length
Posts: 476
Joined: Sat Mar 21, 2009 5:22 pm
Location: Opinions are like rear ends every one has one and they all stink from time to time!

Re: pics of a chain rigged Bruce anchor

Post by length »

W5CDS wrote:
length wrote:I am using the chain and ziptie method.
x2, although I use a little more chain (about 30" - keeps the bruce's nose down so it buries in the bottom a little easier).
Yup!
Attachments
P9290153.JPG
Post Reply