Ok after ten boats I am going to build one using epoxy,
If I use US composites slow hardner for the boat can I chang to a fast hardner for the filets
to speed them up?
Ron
I am plenty spoiled to doing two or three processes in a day I think its going to drive me crazy watching epoxy dry
Question from an epoxy nubey
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
- Light Keeper's Kid
- TKF 1000 Club
- Posts: 1528
- Joined: Tue Nov 11, 2008 6:37 pm
- Location: Stuck in the Middle, Wadefish 15' -Heritage 9.5 Angler (OlllllO)
Re: Question from an epoxy nubey
Me Too But I'm glad it was you that asked
Mike
Mike
- gerald
- TKF 4000 Club
- Posts: 4174
- Joined: Thu Jun 12, 2003 10:48 am
- Location: Gatesville, tx www.theoldmansboats.com
Re: Question from an epoxy nubey
I use the 635/556 combo--which is the slow, non blushing 2 to 1 mix for laminating. For the glue and goopie I use the 1 to 1 thick mix. The thick mix is much faster, though it will still take some hours to harden.