the first sailing of the "Amy's Toe"
- TexasZeke
- Posts: 440
- Joined: Thu Jan 24, 2008 7:35 pm
- Location: China Spring, Texas Hand built boats
the first sailing of the "Amy's Toe"
bowgarguide suggested we posted 1st reviews of new boats here too, so here it goes.
A couple of things I forgot to mention in the original post that should be pointed out. My original target cost for this boat was around 150.00. I hit that one pretty close exact cost is hard to figure because I had some of the wood used laying around the shop already, but I also bought some stuff that I never used. I had hoped to do it in a week, ended up a week and four days. I will be the first to say, you get what you pay for so to speak. For a pretty as Darrells boat and all of the others are, mine is just that ugly, but this has always been the test vehicle, the prototype. Not only was/am I trying to learn what I want in a boat, from a boat, but also about building a boat. I have followed every post on build, and the people posting will never know just how much I have learned, or thank them for the free schooling. Oh yeah, the boats name "Amy's toe", my wife doesn't like boats and as I was building it I kept teasing her about her paddling it. She told me she wasn't even going to put her toe in it.
This should be the last report on this post. Managed to get out for a few hours this afternoon and try the boat out. Did it perform to expectations? Not really sure how to answer that one because I'm not really sure what I expected. From the amount of room in the boat I was plenty happy. It did turn out a little more tippy than I might have liked, but I don't think it is any worse than my plastic boat. I will say this, even with about a 15mph cross wind it will pretty much stay on track like it's on rails. It is harder to turn than the plastic boat but it is also 4' longer than the plastic boat. Take about two strokes with the paddle and it seems like it would glide across the lake, in a straight line no less, the plastic boat always wanted to turn one way or the other. It seems much faster than the other boat, but it's hard to judge when your fighting the wind the whole way. Plus it's been about 2 months since I had the other one out. I did manage to pull one tiny cat off a jug, couldn't get anything on rod and reel
Loaded and ready to go
the set
the payoff, well kinda
a snake, so what kinda snake is this
my biggest complaint is about loading and hauling, that one I'm gonna have to work on
A couple of things I forgot to mention in the original post that should be pointed out. My original target cost for this boat was around 150.00. I hit that one pretty close exact cost is hard to figure because I had some of the wood used laying around the shop already, but I also bought some stuff that I never used. I had hoped to do it in a week, ended up a week and four days. I will be the first to say, you get what you pay for so to speak. For a pretty as Darrells boat and all of the others are, mine is just that ugly, but this has always been the test vehicle, the prototype. Not only was/am I trying to learn what I want in a boat, from a boat, but also about building a boat. I have followed every post on build, and the people posting will never know just how much I have learned, or thank them for the free schooling. Oh yeah, the boats name "Amy's toe", my wife doesn't like boats and as I was building it I kept teasing her about her paddling it. She told me she wasn't even going to put her toe in it.
This should be the last report on this post. Managed to get out for a few hours this afternoon and try the boat out. Did it perform to expectations? Not really sure how to answer that one because I'm not really sure what I expected. From the amount of room in the boat I was plenty happy. It did turn out a little more tippy than I might have liked, but I don't think it is any worse than my plastic boat. I will say this, even with about a 15mph cross wind it will pretty much stay on track like it's on rails. It is harder to turn than the plastic boat but it is also 4' longer than the plastic boat. Take about two strokes with the paddle and it seems like it would glide across the lake, in a straight line no less, the plastic boat always wanted to turn one way or the other. It seems much faster than the other boat, but it's hard to judge when your fighting the wind the whole way. Plus it's been about 2 months since I had the other one out. I did manage to pull one tiny cat off a jug, couldn't get anything on rod and reel
Loaded and ready to go
the set
the payoff, well kinda
a snake, so what kinda snake is this
my biggest complaint is about loading and hauling, that one I'm gonna have to work on
- gerald
- TKF 4000 Club
- Posts: 4174
- Joined: Thu Jun 12, 2003 10:48 am
- Location: Gatesville, tx www.theoldmansboats.com
Re: the first sailing of the "Amy's Toe"
Man...the boat looks beautiful to me. It's floating, you're fishing--what more can you ask for. Hey...pick up that pet snake from the stump and take it to bowgarguide....
What lake were you in?
What lake were you in?
Re: the first sailing of the "Amy's Toe"
There is not a thing wrong wiith that boat. Like Gerald said it floated right and you already caught the first fish out of something that started as a pile of wood on the floor. That is the coolest part, you built it.
My first boat ended up tippy also. It is a 14-29 Pirogue.
My first boat ended up tippy also. It is a 14-29 Pirogue.
- Night Wing
- TKF 10,000 Club
- Posts: 33438
- Joined: Wed Sep 24, 2003 9:30 pm
- Location: Magnolia, TX
Re: the first sailing of the "Amy's Toe"
The photo with the stump and snake in it is a good one. We have quite a few snakes that look like that in Lake Robbins where I work on the Waterway.
- TexasZeke
- Posts: 440
- Joined: Thu Jan 24, 2008 7:35 pm
- Location: China Spring, Texas Hand built boats
Re: the first sailing of the "Amy's Toe"
I was in Renyolds Creek on Lake Waco. Trust me, I'm not really knocking the boat, it just falls more into the Volkswagen class than the Porsche class. Truthfully other than being more tippy than I wanted, I'm really pretty happy with it. I took two different sets of plans and combined them to build the size I wanted, built the way I wanted to build it. It has a ton of room, tracks like an arrow, easy to paddle. As I use it more I will figure out what changes the next one needs
-
- TKF 2000 club
- Posts: 2424
- Joined: Sat Apr 12, 2008 8:42 pm
- Location: Guadalupe County
- Contact:
Re: the first sailing of the "Amy's Toe"
The last sentence says it all! I built bunches of rifles for myself and other people. Every one I built for myself was supposed to be "the one". Well, so much for that stuff! Your tastes will change, your goals will change, and your attitude will change, but...you'll still be building the next one "...just to see what if...". The best part is, as long as there's material out there and the odd can of epoxy, you're only moments away from a new keel laying, as it were! Great stuff, man!TexasZeke wrote:Truthfully other than being more tippy than I wanted, I'm really pretty happy with it. I took two different sets of plans and combined them to build the size I wanted, built the way I wanted to build it. It has a ton of room, tracks like an arrow, easy to paddle. As I use it more I will figure out what changes the next one needs
Re: the first sailing of the "Amy's Toe"
In the first pic is that the old boat ramp and if so can you still drive to it.
Darrell
Darrell
Re: the first sailing of the "Amy's Toe"
Diamondback watersnake. Lake Waco has bunches of them and some are huge. I call them "Texas anacondas". Curious as to what your boat weighs? The name is a classic
Kim
Kim
Re: the first sailing of the "Amy's Toe"
TexasZeke wrote:For a pretty as Darrell's boat and all of the others are, mine is just that ugly, but . . . .
But nothing! I still say there's no such thing as an ugly homemade boat. Maybe a homemade canoe built from aluminum scraps will make you feel more loving to your creation? This guy wimped out and got a store-bought paddle, though, sheesh.
- Attachments
-
- Homemade Aluminum Canoe.jpg (20.23 KiB) Viewed 5622 times
- Light Keeper's Kid
- TKF 1000 Club
- Posts: 1528
- Joined: Tue Nov 11, 2008 6:37 pm
- Location: Stuck in the Middle, Wadefish 15' -Heritage 9.5 Angler (OlllllO)
Re: the first sailing of the "Amy's Toe"
Reminds me of the Jonny Cash Song "One Peice at a Time"
Mike
Mike
Re: the first sailing of the "Amy's Toe"
Nice looking boat!
- TexasZeke
- Posts: 440
- Joined: Thu Jan 24, 2008 7:35 pm
- Location: China Spring, Texas Hand built boats
Re: the first sailing of the "Amy's Toe"
Yeah they opened it back up a year or so ago. For a 30.00 permit you can launch or fish from the bank all you want for a year. The permit applies to all COE lakes, not just wacoDarrellS wrote:In the first pic is that the old boat ramp and if so can you still drive to it.
Darrell
- TexasZeke
- Posts: 440
- Joined: Thu Jan 24, 2008 7:35 pm
- Location: China Spring, Texas Hand built boats
Re: the first sailing of the "Amy's Toe"
don't know how accurate this is but me standing on a bathroom scale, holding the boat and trying to read the scale, I come up with about 70lbs. Which is heavier than I had hoped forStrider wrote:Diamondback watersnake. Lake Waco has bunches of them and some are huge. I call them "Texas anacondas". Curious as to what your boat weighs? The name is a classic
Kim