Homemade Kayak Loader using PVC pipes and Suction Cups

User avatar
twiceayear
TKF 1000 Club
TKF 1000 Club
Posts: 1052
Joined: Mon Aug 30, 2004 5:39 pm
Location: H-town

Homemade Kayak Loader using PVC pipes and Suction Cups

Post by twiceayear »

Here is an idea for someone like me who lacks strength, height and youth to load your kayak on top of your car.

This whole setup costs less than $20.00 which is a lot less than the two rear view mirrors I had to replace when I dropped my kayak and sheared off one of them.

It's made from a 4-cup suction cup from Harbor Freight, PVC and used tennis balls.

Image
In the middle of cutting the unit into two.


Image
Optional tennis ball. I image you can use pool noodles also.


Image
Dry fit before gluing


Image
Ready to test for the first time.


Image
Last edited by twiceayear on Wed Jun 03, 2009 11:46 am, edited 2 times in total.
User avatar
davewave12
Posts: 436
Joined: Sat Jul 01, 2006 1:52 pm
Location: Spring

Post by davewave12 »

Wow that looks like a great idea, and very creative to boot. I will keep it in mind when I can no longer clean and jerk my layak onto my F-150
User avatar
Shell Pad
Posts: 132
Joined: Fri Nov 24, 2006 4:48 pm
Location: Spring Texas

Post by Shell Pad »

Wow! What a great idea.
User avatar
freespool
TKF 1000 Club
TKF 1000 Club
Posts: 1479
Joined: Sun Mar 19, 2006 1:33 pm
Location: Friendswood, TX

Post by freespool »

great idea. I could have used that before taking off the mirror on my 4runner, or the many times it has slid down the back and side. The back hatch and sides of my 4runner look like someone took a belt sander to it. it may be to late for me, but thanks for trying to save the others.
User avatar
Mythman
TKF 10,000 Club
TKF 10,000 Club
Posts: 23716
Joined: Wed Mar 22, 2006 8:23 am
Location: Cypress.......watching the weather to go BTB fishing!

Post by Mythman »

Super idea, design and product!!!
User avatar
Kingz
TKF 4000 Club
TKF 4000 Club
Posts: 4194
Joined: Wed Oct 18, 2006 11:52 pm
Location: Portland TX
Contact:

Post by Kingz »

What a great idea, should help alot of people here...Thanks...G
User avatar
treysdaddy
Posts: 631
Joined: Sun Feb 11, 2007 2:48 pm
Location: NW Houston Barker Cypress / 290

Post by treysdaddy »

Really cool. What a great idea! Now I get to make a trip to harbor freight. I'd like to see if i could adapt it to get my yak on top of my pathfinder.
J-Man
Posts: 176
Joined: Mon Mar 03, 2008 12:52 am
Location: Schertz
Contact:

Post by J-Man »

Sweet idea! I'm going to go buy me one of those this week. Thanks!
User avatar
Fin-Addict
TKF 4000 Club
TKF 4000 Club
Posts: 4216
Joined: Thu May 04, 2006 2:36 pm
Location: Baytown

Post by Fin-Addict »

Damn dude, you could probably sell those
Freakin Genius :lol:
User avatar
twiceayear
TKF 1000 Club
TKF 1000 Club
Posts: 1052
Joined: Mon Aug 30, 2004 5:39 pm
Location: H-town

Post by twiceayear »

treysdaddy wrote:Really cool. What a great idea! Now I get to make a trip to harbor freight. I'd like to see if i could adapt it to get my yak on top of my pathfinder.
When I bought it, I called the store off 290 and they said this item is an "internet" item only so I had to order it online. Don't know if the same situation exists. You might want to do the same. It's a long drive for me.
User avatar
RPB
TKF 1000 Club
TKF 1000 Club
Posts: 1459
Joined: Mon May 19, 2008 7:08 am
Location: Burnet/Pasadena, TX

Post by RPB »

scuppersancho wrote:Damn dude, you could probably sell those
Freakin Genius :lol:
I agree, I'd buy one from you in a heartbeat, you just solved the the reason I don't go more often.

I'll just have to make one now

The item number on that suction cup is ITEM 2659-1VGA
User avatar
twiceayear
TKF 1000 Club
TKF 1000 Club
Posts: 1052
Joined: Mon Aug 30, 2004 5:39 pm
Location: H-town

Post by twiceayear »

RPB wrote:
scuppersancho wrote:Damn dude, you could probably sell those
Freakin Genius :lol:
I agree, I'd buy one from you in a heartbeat, you just solved the the reason I don't go more often.

I'll just have to make one now

The item number on that suction cup is ITEM 2659-1VGA
Thanks, glad the idea help. I had to do this. My close-to 50 years old body is starting to break down. Back surgery, shoulder surgery, now scheduled for another shoulder surgery on the other side. It's depressing that even your heart is in it but the equipment keeps breaking down.

A note of warning: the suction cup handle is a tiny bit smaller than the inside diameter of the PVC so put a lot of PVC glue on both sides and let them sit for close to a minute to let both side get gooie before you join them. I also let it cure for a full day before actually put weight on it. I thought about shim it up with something but went without it.

Can I sell them? Yes may be I will try to Ebay one just to see. I hate that between Ebay and Paypal, the fees are just eating up all your profit.
User avatar
Just Fish
Posts: 578
Joined: Tue Jul 08, 2008 11:52 pm
Location: Smithson Valley. 09WS Ride,09 Malibu Stealth 12

Post by Just Fish »

I see a new product in the future. Great idea you had.
J-Man
Posts: 176
Joined: Mon Mar 03, 2008 12:52 am
Location: Schertz
Contact:

Post by J-Man »

A note of warning: the suction cup handle is a tiny bit smaller than the inside diameter of the PVC so put a lot of PVC glue on both sides and let them sit for close to a minute to let both side get gooie before you join them. I also let it cure for a full day before actually put weight on it. I thought about shim it up with something but went without it.



You might actually put some PVC glue on there, then wrap teflon tape around that, then put more pvc glue, building up layers, then the actual pvc pipe. I used that technique before in the aquarium industry and it always worked for me.
User avatar
twiceayear
TKF 1000 Club
TKF 1000 Club
Posts: 1052
Joined: Mon Aug 30, 2004 5:39 pm
Location: H-town

Post by twiceayear »

J-Man wrote:You might actually put some PVC glue on there, then wrap teflon tape around that, then put more pvc glue, building up layers, then the actual pvc pipe. I used that technique before in the aquarium industry and it always worked for me.
Thanks a lot J-Man. That's good information. I really appreciate that insider info you shared.
User avatar
The Rob
Posts: 50
Joined: Sat Oct 04, 2008 8:55 am
Location: Pearland, Tx

Post by The Rob »

That is a cool idea. I have a Tacoma and my son destroyed one of the foam blocks and lost another. You think I could use these in place of the foam blocks?
Attachments
DSC02530.JPG
User avatar
Fodder4U
Posts: 133
Joined: Sun Feb 11, 2007 2:52 am
Location: The Colony/DFW Area

Post by Fodder4U »

Another idea would be to cut short tubes of PVC to insert into the tennis balls and then slide the whole thing into the PVC arms thus allowing the tennis balls to roll. Make sense?
User avatar
Mr23779
Posts: 457
Joined: Tue Feb 12, 2008 12:29 pm
Location: Spring, TX

Post by Mr23779 »

Freakin' genius idea!
User avatar
twiceayear
TKF 1000 Club
TKF 1000 Club
Posts: 1052
Joined: Mon Aug 30, 2004 5:39 pm
Location: H-town

Post by twiceayear »

The Rob wrote:That is a cool idea. I have a Tacoma and my son destroyed one of the foam blocks and lost another. You think I could use these in place of the foam blocks?
First, that's one pretty ride you have there. Wish I have one.

The loader was meant to act as a ramp only, not to bear weight like a rack which is what the foam blocks do. I would not recommend using it that way.
Fodder4U wrote:Another idea would be to cut short tubes of PVC to insert into the tennis balls and then slide the whole thing into the PVC arms thus allowing the tennis balls to roll. Make sense?
Absolutely, actually the balls are kinda in that setup already because of the T-connection and the 45 degree connection acting like the big PVC you are mentioning. Right now they don't freely roll because I cut the holes a little too small so they are really tight.

I was somewhat surprise how little effort it took to push/slide the P15 onto the roof. That clip on the video was the third time I push that kayak over the loader.
User avatar
Backwater Drifter
TKF 1000 Club
TKF 1000 Club
Posts: 1192
Joined: Wed Sep 27, 2006 10:56 pm
Location: Rockwall Tx

Post by Backwater Drifter »

Mr23779 wrote:Freakin' genius idea!
I agree great stuff! :D
bk9824
Posts: 174
Joined: Sun Mar 11, 2007 4:13 pm
Location: The Galleria

Post by bk9824 »

Can't find the 4-cup device on harbor freight anymore... did a search for the item number to no avail...

any ideas on a lead where to get one of those suckers?
finfisher
Posts: 129
Joined: Fri Dec 19, 2008 2:14 pm
Location: NW Houston

Post by finfisher »

:idea:
BRILLIANT !!!
You got something there
bk9824
Posts: 174
Joined: Sun Mar 11, 2007 4:13 pm
Location: The Galleria

Post by bk9824 »

Did some searching (much more than anticipated) and found this link since the quad cup product isn't to be found on Harbor's website.


http://www.markertek.com/Product.asp?ca ... ampaign=sf
User avatar
RPB
TKF 1000 Club
TKF 1000 Club
Posts: 1459
Joined: Mon May 19, 2008 7:08 am
Location: Burnet/Pasadena, TX

Post by RPB »

Google
2659-0VGA
DesertDog11B
TKF 10,000 Club
TKF 10,000 Club
Posts: 11576
Joined: Thu Jun 28, 2007 12:48 am
Location: RGV-Edinburg, Tx."Duty, Honor, Country!"

Post by DesertDog11B »

That's one hell of an idea! :D
Post Reply