TexasKayakFisherman.com est. 2000

Kayak fishing the Lone Star State...


By jfraymond
#2207740
Well as anyone who has spent significant time reading build threads, DYI modifications and videos on the internet knows , at some point you have accumulated enough Ideas to the point your brain magically blends enough of them all together into a concept you know is probably terrible but at the same time curiosity gets the better of you to try it anyway....So here is my experimentation I've been playing with a few hours every weekend or two this summer.

its not a kayak but its roughly the size of my PA14... not sure what it is exactly but closet description I guess would be a low cost composite skin on foam microcruiser fishing sharpie.... or I guess more simply my redneck river yacht. :shock: :lol:

started cutting foam and bending
IMG_1699.JPG
IMG_1699.JPG (37.97 KiB) Viewed 3345 times


IMG_1720.JPG
IMG_1720.JPG (42.58 KiB) Viewed 3345 times


IMG_1726.JPG
IMG_1726.JPG (36.9 KiB) Viewed 3345 times


ended with a rough boat shape :mrgreen:


(more pics to come)
By jfraymond
#2207741
then did all the filleting filling and put on the a skin of what was used as fiberglass before the invention of fiberglass.

Roll micro holes for glue to act as 1000 tiny nails
IMG_1757.JPG
IMG_1757.JPG (34.02 KiB) Viewed 3342 times

using titebondII and a paint roller glue down the canvas
IMG_1759.JPG
IMG_1759.JPG (26 KiB) Viewed 3342 times


IMG_1761.JPG
IMG_1761.JPG (36.28 KiB) Viewed 3342 times






xx
By jfraymond
#2207742
keep wrapping it up and then apply coats of exterior enamel paint

IMG_1768.JPG
IMG_1768.JPG (36.1 KiB) Viewed 3342 times


IMG_1804.JPG
IMG_1804.JPG (34.32 KiB) Viewed 3342 times


IMG_1791.JPG
IMG_1791.JPG (28.54 KiB) Viewed 3342 times


you soak a layer of it into the fabric every 10 mins until it stops absorbing and stays shiny.
By jfraymond
#2207744
Will post more pics tomorrow...can go over anything anyone is interested in but for now here was the finished rough hull.

IMG_1831.JPG
IMG_1831.JPG (32.09 KiB) Viewed 3341 times


IMG_1909.JPG
IMG_1909.JPG (32.57 KiB) Viewed 3341 times


It even floats. :D

IMG_1917.JPG
IMG_1917.JPG (38.17 KiB) Viewed 3341 times





xx
By jfraymond
#2207875
Thinwater skinner wrote:Nice clean and clear hole of water... Fishing must be tough unless it is the dark of the moon fishing?

Haha...yeah for sure. :lol:

anyway here are pics of my first test fit of the rudder and mast... have the stuff for a balanced Lug rig but figured WTH ill whip up a quick rigid wing sail in same method as I used for RC sailboats using foam as well. Gives better upwind performance with less area and provides buoyancy in a knock down.

IMG_2066.JPG
IMG_2066.JPG (40.2 KiB) Viewed 3286 times



that's where it is... next up is to make the cabin which will be a fold down inside gunwhales design so its out of the way until needed and finish out the rear cockpit with icechest/seat and rod holders for trolling. finish out the inside with seating, storage, electrical, ect and any other fitout stuff that still remains and then all the cosmetic stuff to make it Purdy after a weekend of seeing if everything is gonna work and standup to some ubuse.

been thinking of a way to use a aux pedal drive but its kind of hard with a single solid floor I don't wanna put a hole in... wonder if a fin drive would propel something this big decently?
Attachments
IMG_2062.JPG
IMG_2062.JPG (36.1 KiB) Viewed 3286 times
IMG_2061.JPG
IMG_2061.JPG (36.18 KiB) Viewed 3286 times

If you notice, 7'6" glass rods were the norm […]

South Bay Red Fishing

thanks for the report - you beat the beating wind […]

Amazing. That is a cool idea. Wonder if it can ca[…]

My 1000th Post

Congrats shoffer! And your post was, well in[…]