Weight of 1/4" ply with glass and epoxy per sf
Weight of 1/4" ply with glass and epoxy per sf
I tried searching but had no luck. Does anyone know the approximate weight per square foot of 1/4" marine ply coated?
- bowgarguide
- TKF 5000 Club
- Posts: 5370
- Joined: Mon Jan 15, 2007 7:52 pm
Re: Weight of 1/4" ply with glass and epoxy per sf
That can vary a ton, kind of ply, weight of cloth,cloth on one side or both,expertise of builder,.
I guess that doesnt answer your question but is the best I can do.
Ron
I guess that doesnt answer your question but is the best I can do.
Ron
- richg99
- TKF 3000 Club
- Posts: 3208
- Joined: Wed Oct 13, 2004 9:31 pm
- Location: North Houston (FM1960), TX
Re: Weight of 1/4" ply with glass and epoxy per sf
I found a web site that shows professional coated ply. Maybe they can give you weights etc.
http://vanshield.com/products/how-it-works/" onclick="window.open(this.href);return false;
Rich
http://vanshield.com/products/how-it-works/" onclick="window.open(this.href);return false;
Rich
Re: Weight of 1/4" ply with glass and epoxy per sf
Look up the weight of an entire 4x8 sheet, and divide by 32? The additional weight from properly applied 4-6 oz glass and resin would be a few percent at most.