TexasKayakFisherman.com

Just curious to see what you all are driving around in on the beaches.

1997 Jeep Wrangler, was my father's Jeep until I got a hold of it. Backed it into my shop for a vacuum leak, next thing I am replacing the axles, new interior, and paint.

I can carry 3 up top on my Titan with a bed rack

Tombo wrote:1997 Jeep Wrangler, was my father's Jeep until I got a hold of it. Backed it into my shop for a vacuum leak, next thing I am replacing the axles, new interior, and paint.

That is a sweet looking Jeep Tombo!!!

Gallonegro wrote:

Tombo wrote:1997 Jeep Wrangler, was my father's Jeep until I got a hold of it. Backed it into my shop for a vacuum leak, next thing I am replacing the axles, new interior, and paint.

That is a sweet looking Jeep Tombo!!!

Thank you. One of the easiest vehicles to get parts for. I don't think there are two Jeeps the same from all the accessories one can get. We bought a new F150 two years ago and put only 13,000 miles on it. Jeep Wrangler's are fun to drive around town. Scored some Rubicon wheels and tires from a newer model Wrangler, but no pics.

Primary rig...

Sent from my SAMSUNG-SM-G870A using Tapatalk

Rig #2 1998 K-series 4wd - though it is soon to be replaced with a Tocoma.

Sent from my SAMSUNG-SM-G870A using Tapatalk

Boomy wrote:Primary rig...

Sent from my SAMSUNG-SM-G870A using Tapatalk

Always thought a for door Wrangler to be the perfect rig. Fishing rods don't fit in my two door.

I welded in rod holders between the bumper and body. 7' rods go almost window to window.

Sent from my SAMSUNG-SM-G870A using Tapatalk

Boomy wrote:Rig #2 1998 K-series 4wd - though it is soon to be replaced with a Tocoma.

Sent from my SAMSUNG-SM-G870A using Tapatalk

Can you tell me more about that pop up set up? Been looking for something like that to add to my pop up so I don't have to lift my hobie up on a ladder rack.

Sorry dude, no pop-up roof will take the weight of a Hobbie. You could install a racking system on the outside of the popup (welded to the frame) and cross over. I've seen that done, but it'll make it wider. I welded a removable cross bar to the tounge get and use foam to distribute the weight that is on the roof (less than a couple pounds)

Sent from my SM-T350 using Tapatalk

So far so good.

Since this is a Viking thread lol
Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Im too much of a caveman to post pics but we can carry 3 kayaks on top of our nissan armada.

The Rover

It’s a work in progress


Sent from my iPhone using Tapatalk

This is my little toy when I go to the coast!

https://images.craigslist.org/00y0y_77g ... 00x450.jpg

firefighter23 wrote:


It’s a work in progress


Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Ezloading trailer holding PA 12s.


Sent from my iPhone using Tapatalk