TexasKayakFisherman.com est. 2000

Kayak fishing the Lone Star State...


Please Visit our Sponsor Hook1 Kayak Fishing Gear
By Chubs
#2251493
I posted this in the pinned topic but I don't think anyone looks there :) I'll ask the question a different way though here.

I've got a Heritage Redfish 12' paddle yak without a rudder.
After my last fishing trip of trying to go 6 miles and having to fight the wind to stay on course the entire time, I decided it's time to get a rudder.

So I bought a cheap rudder off of Amazon; it looked pretty solid (of course I've not got it in hand yet).
I've got my method to mount it in mind.

Now my big question is; how should I control the thing?

I saw some different options; 1 is to modify my existing foot rest rails to be mobile and tie the rudder directly to the foot pegs. The drawback though is I wouldn't be able to brace my feet anymore since the footrest would be free sliding.
Another option was to replace my footrest with one of the footrest's with toe controls. That looked like a good idea but I was reading some concerns about people getting the toe control seizing up after a few trips in salt water - that obviously wouldn't be good if I fish the bays.
The other method then that I saw, was the example in the pinned post up top, the guy looks like he's got a pulley and ropes connected directly to the rudder run up to about even with the seat. And I figure maybe he just makes broad course corrections as he goes but not constant adjustments.

So my biggest question for those with rudders in a paddle yak; Is there a big benefit to having a foot controls rudder vs hand controlled rudder? Something to consider - do you need to make adjustments constantly or is it more you can set the rudder when you start out and then don't have to make anything but minor adjustments (which could be done with your paddle).

Primarily I want the rudder for when I've moving between spots because I'm tired of fighting the wind. I do like to fish from the kayak though so foot control seems like it could be nice if I'm drifting down a river/ current. Note that I already have an anchor trolley and drift sock which generally keeps me pointed the direction I want to go; I just can't make course corrections without a rudder. How likely would you find yourself making course corrections while fishing though?
User avatar
By Kirk B.
#2251495
I have the Jackson Cuda 12 with the sliding foot peg rudder controls. Since they work opposed to each other, in other words, when you push one down the other one comes up, the sliding isn't an issue. I can still push against the peg, I just have to keep the other foot tight, too.

As for course corrections while fishing, I do it all of the time following the bank or the weed line. I can also make corrections for wind drift and paddle drift.
I honestly don't know how I managed before I had a rudder. It make life so much easier.

Kirk B.
By Chubs
#2251522
Interesting. Well I'll have to try foot controls, sounds like it could be useful. Especially for scouting out an area till I find the fish, or drifting.

Now I need to figure out how to do a cable install!
User avatar
By Ron Mc
#2251533
the delrin bracket I designed for a skeg on my daughter's Redfish 10 should work to mount a rudder on your Redfish 12.
Image
Image you might want to double-check dimensions on your rudder

you can find all the details on this thread
viewtopic.php?f=53&t=176920&p=1741012

on this post, you can find free Chrome and Firefox browser add-ons to see all the original photos everywhere
viewtopic.php?p=2248836#p2248836

and definitely use foot controls - should be no problem to find foot control that mounts on the same centers as your foot peg bracket.

I would grab these - there's only one left in stock
https://sportsdealbox.com/index.php?rou ... t_id=17209
User avatar
By Ron Mc
#2251541
Fishtolive wrote:Nice, can you help letting me know where did you buy the Delrin block in Houston?
Million thanks in Advance

the whole accounting is on the skeg thread, but I bought the bar from McMaster.com

Great place - I rebuild OPs valuable antique fishing reels, and have bought phosphor-bronze sheet there for making springs (also good for spindle drag pads to fix my dad's baitcasters), and many fasteners and tools. They deliver in 2 days.
However, for getting a handful of fasteners, Alamo bolt is near my office - much better than a hardware store for fasteners.

Image
In addition to your rudder control cables, you'll probably need a retraction/deployment lead for your rudder.
Here's my tarpon rudder - the green line retracts the rudder when you pull and cleat it, and when you release it, the rudder is deployed by an internal spring.
Image

I have those same Sea-Lect / Sea Dog foot controls and really like them.
Knarps are very handy for fixing and adjusting cable ends.
ImageIf I need to adjust trim on my rudder, I just loosen the knarp, pull the cable, and retighten the knarp. I can do it all at the control end without having to mess with the rudder end.
By Chubs
#2251561
Awesome! Great ideas.

I'm going to try to go cheap and just modify the stock foot peg brackets so they don't latch the peg (I'm thinking some sort of clip to keep the peg dis-engaged), and then run the rudder control to the foot rest. If I break the stock footrest with this idea; I'll be picking up that Sea-lect footbrace :lol:

Also, I've got a metal bracket that I'm hoping will fit the rudder. If not I'll need to figure out what delrin is and how to cut it!

Where did you get your cable? I assume it's stainless. I was just going to make a trip to Lowes or Ace and see what they had in stainless.
User avatar
By Ron Mc
#2251562
Of course the Tarpon is pre-rigged with cable housing. I also bought the teflon-coated stainless wire rope from McMaster.
I'm showing two different boats. My 16' Tarpon with rudder, and my daughter's 10' Redfish with my skeg attachment.

Delrin is acetyl copolymer - it's about the same strength as aluminum pot metal. It saws and drills easily. But it was a $30 plastic bar to build my bracket. The thing is, I did the math (bending calculations), and my design has passed the test for these five years. And I did it without drilling holes in the boat, using the existing wellnuts for the Native roller wheel.
Image
I loaned my daughter's Redfish to a buddy (check my Arroyo Report) and he managed to kick out the clip on one of the foot pegs. It was a booger, but with some close inspection and a wood wedge, I managed to pop it back in after the trip. So I'd assume if you push forward hard (hammer) on the foot peg, the clip will pop out and you'll have a free sliding peg.

I still say grab the cheap Sea Dog controller while it's still here. Everyone I know with them like them better than other foot controllers. These are getting harder to find, they retail for $75, and they're worth that.

If you want to look at other ways to mount a rudder, search kayak rudder gudgeon

Texas Kayaks in Boerne is a Heritage dealer - I know he's installed a few rudders on Redfish 12. Might call him for ideas.

Here's a 14 rigged with rudder and good photos
https://www.tapatalk.com/groups/hckac/m ... t2331.html
Reel Cleaning - Tackle Hut

WOW... those guys have been around for a very lon[…]

Extreme low tide

I remember a fishing guide telling me that when th[…]

Jackson Big Tuna in Abilene FS

Text pics to 210-262-0727 Sent from my iPhone us[…]

Since then my fishing is mostly about scouting ne[…]