Back after a long break with a new project boat.

Post Reply
User avatar
recondoc
Posts: 534
Joined: Mon Sep 05, 2005 10:42 pm
Location: San Antonio TEXAS

Back after a long break with a new project boat.

Post by recondoc »

Howdy Gang,
I've been away for a few years (Just got so busy with life that I stopped paddling) and am ready to play on the water again and get some much needed exercise. I just sold off my Ultimate 14.5 and picked up a used but pretty decent shape Prowler 13 that someone had done the BassYak conversion to and then removed it.
The one thing I've noted is that this guy has lots of extra holes drilled in it and most have old style screw in plugs in them. I'd like to clean this up with some plastic welding but am not sure how pretty and smooth I'll be able to get them. Any input would be greatly appreciated.
Thanks,
Doc

Also: If anyone happens to have some dark green patch plastic laying around, I could use some.
Post Reply