Page 11 of 27

Re: Post your trailer!!!!

Posted: Tue Mar 06, 2012 9:14 am
by jackamber
Lots of great ideas on this thread, especially if you are planning to build, design, enhance your trailer! Thanks to all for the wealth of information!

This topic should be a sticky!!!

Re: Post your trailer!!!!

Posted: Thu Mar 08, 2012 8:02 pm
by awoodman
jackamber wrote:Lots of great ideas on this thread, especially if you are planning to build, design, enhance your trailer! Thanks to all for the wealth of information!

This topic should be a sticky!!!

You are right it should be saved and stuck at the top of the forum...put it to a vote on another post.. :)

Re: Post your trailer!!!!

Posted: Thu Mar 15, 2012 7:25 am
by jeeper50
Putting the finishing touches on my latest trailer for me to haul my tarpons around this year... bought an ols scotty camper frame and added a tongue.

Re: Post your trailer!!!!

Posted: Mon Mar 19, 2012 11:05 am
by CR
I finally got my trailer picked up this weekend. I bought it off craigslist down by Austin and my sis and BIL picked it up and took it to their house in Round Rock.
It's about the same size as the Malone trailers, but much heavier built. It came with one set of "J" racks and I already have two sets. After I get the paint cleaned up and the boats loaded, I'll post more pics.

Image

Image

This is after new paint and a few other things. I have three sets of "J" racks that I can use to haul three boats. I sure like the storage box.

Image

Image

Re: Post your trailer!!!!

Posted: Wed Mar 21, 2012 1:51 pm
by Whiplash
Not completely finished. I need paint and padding. It has 3 doors of lockable storage and 4 kayak racks
old boat trailer
old boat trailer
DIY trailer7.jpg

Re: Post your trailer!!!!

Posted: Wed Apr 04, 2012 5:50 am
by Rollin
I had been looking to change my trailer for hauling Yaks. Up till August I had been using my 16’ double axle flatbed work trailer. It’s not a real big trailer but way more than I need to haul two Yaks. Recently on Craigslist I found a boat trailer in Kansas City. It was big enough and had 15” tires and at $200 the price was right. One Friday morning we were nearing completion on a project and ran out of material, so I decided to hit a few licks on the trailer. We got a lot done and then over the weekend I was able to get enough done on it to make it road worthy.

I wanted to reach the point where all I have to do to go fishing is, hookup my trailer already loaded with the yaks and gear. Grab a few snacks and roll.

Image

Image

Image

Image

Image

Image

Image

Re: Post your trailer!!!!

Posted: Wed Apr 04, 2012 2:02 pm
by Rollin
Image

Re: Post your trailer!!!!

Posted: Wed Apr 04, 2012 3:02 pm
by Cudadude
I picked this up off a guy about a year ago, its been a great trailer, A very light setup and has been great to have.

Image

Re: Post your trailer!!!!

Posted: Thu Apr 05, 2012 9:31 am
by lptxguy
My Pro Angler & Ultra 4.7 combo.

Re: Post your trailer!!!!

Posted: Sat Apr 07, 2012 11:24 am
by Mojo227
My trailer is always a work in progress. Always changing something on it.
100_0024.JPG
100_0023.JPG

Re: Post your trailer!!!!

Posted: Thu Apr 12, 2012 12:07 pm
by BigDozer66
MrStinkyPickle wrote:hey guys, couldn't help but notice that a ton of people have used Unistrut channel and brackets on rigging out their trailers. Please let me know if any of ya'll are thinking about any channel or fittings from their line. I work for a construction supply company and we are a huge stocking distributor for their entire line. We are north of downtown just outisde 610 loop. I have been in Home Depot and seen what they charge for the strut. Don't buy from them unless you have to, I would be more than happy to use my employee discount on anything in their product line for any fellow yakers. Check out their webpage http://www.unistrut.us/ and give me a pm or call our office (and yes you can even ask for StinkyPickle and they will send you to me)713-692-2323 not trying to plug our business, we just stock a large selection of their material and the brackets to go with it. I am fixing to be modding a trailer with a buddy and we are looking at using the "TeleStrut" system. I'll get some before and after pics up. Here is just an idea of the price difference, hope this is ok with the moderators just these days any extra cash can go for gas! :roll:

1 5/8" 12gauge Half Slot strut -
Home Depot - 1.79ft
MrStinkyPickle - TKF brother in law special - 1.07
Very nice of you! :D

The TeleStrut looks like a great material to use for this purpose.

BigDozer66

Re: Post your trailer!!!!

Posted: Fri Apr 13, 2012 3:58 pm
by frankie14
ISO Kayak trailer help:

I have 17' of available space in by garage, and I have a Tarpon 140 and a Cobra Maurader XF. I want a trailer for them, and I wanted y'alls help in figuring out a setup that would work.

How can I fit a 14' kayak on top of a trailer and make that fit in my 17' of garage? Wouldn't the trailor HAVE to have an adjustable tongue? I don't want a fold up trailer because that defeats my purpose for having one all together... ie. I want to have a fully loaded trailor inside my closed garage, and hook up to it in the a.m. and hit the road!

Thanks

Re: Post your trailer!!!!

Posted: Sat Apr 21, 2012 1:42 pm
by Shaun
I'm still working on this one but she started out as a Jon Boat trailer last summer.

Re: Post your trailer!!!!

Posted: Tue Apr 24, 2012 9:33 am
by dhays
Here is my new canoe/kayak trailer build.

Re: Post your trailer!!!!

Posted: Thu Apr 26, 2012 8:55 am
by Sam Stephens
Here is ours so far , its an old boat trailer , we put new 2in hitch , safety chains , bearing buddies , rims and tires , jack stand , LED lights , and paint. Built a 3ft x 7ft basket for gear also works great for sleeping on , the racks are all welded steel , will hold 5 yaks .
Having a 7 1/2ft long 14in wide and 12in deep steel locking rod box built ( should be done this week ) and a large steel basket or a large tool box for the front , will post again when its done...........
,,,,,,Sam,,,,,,,,,,,,
Image
Image
Image
Image

Re: Post your trailer!!!!

Posted: Thu May 03, 2012 8:02 am
by MattD
After many nights of looking at ideas and countless trips to the hardware store, my first kayak trailer is finished. It started as a Harbor Freight trailer, a pile of SuperStrut and some scrap steel from the dumpster. I added a couple of coats of spray-on bedliner coating and a recycled battery box for tie-down and tools.
Special thanks to G-Man for answering my questions along the way!

Image

Image

Image

Re: Post your trailer!!!!

Posted: Mon May 14, 2012 10:56 am
by G-Man
Nice!

No prob. That's what we're here for.

G-Man

Re: Post your trailer!!!!

Posted: Wed May 16, 2012 4:31 pm
by BigDozer66
MattD wrote:After many nights of looking at ideas and countless trips to the hardware store, my first kayak trailer is finished. It started as a Harbor Freight trailer, a pile of SuperStrut and some scrap steel from the dumpster. I added a couple of coats of spray-on bedliner coating and a recycled battery box for tie-down and tools.
Special thanks to G-Man for answering my questions along the way!

Image

Image

Image
Very nice indeed! :clap:

BigDozer66

Re: Post your trailer!!!!

Posted: Wed May 16, 2012 10:40 pm
by MattD
Thanks guys. I couldn't be happier with how it turned out. Granted it took substantially longer than I planned, but it's much better than trying to lift boats on to the top of my Suburban.
Matt

Re: Post your trailer!!!!

Posted: Fri Jun 01, 2012 7:26 am
by surfers77
Just something I threw together real quick with 2 2x6s. It is my Lawn Mowing trailer, a small 5x8 utility trailer with the gate flipped down. Eventually I will get a rack that slides in and will hold 4-6 kayaks. Drove to and from Houston to Corpus. Family fun, but a pain to load and unload. Wilderness ride 135 w/rudder, Tarpon 140 w/Rudder, Hobie Revolution, Hobie Sport,
Hobie Sport.

Re: Post your trailer!!!!

Posted: Sat Jun 02, 2012 5:15 pm
by TikiTime
Here is my two week transformation. Still not 100% of the loading method. I wonder if they should not be loaded belly down for the two larger yaks (scupper pro and aquaterra prism) with the smaller yaks on top (kids are spirit 120s). Any thoughts or recommendations? Sorry...pictures loaded backwards...

Re: Post your trailer!!!!

Posted: Mon Jun 11, 2012 1:27 pm
by Imaposer
Ok, so as I started looking into getting into the whole kayak fishing scene I was faced with the common problem of how best to haul my kayak and gear. I currently drive a Jeep Rubicon, and to make a long story short, and after looking into rack systems I decided that perhaps a trailer would be the best overall bet. So, I started looking into getting one to adapt. Then it hit me last week... I alread have an OLD trailer just rusting away in the edge of the woods at the corner of my property. In fact, I had considered ways of getting rid of it several times in the last couple of years. It's one of those cheap bolt-together kit trailers that I picked up at Sam's Club about 20 years ago and it has since been replaced with a larger and nicer trailer that I use for motorcycles and general hauling. The newer trailer is nice and useful, but it's also heavy and cumbersome, and the long (tall) folding ramp/gate would ideally need to be removed each time I wanted to use it for hauling Kayaks. Plus, I'd still have to modify it with a rack system for kayaks and I'd rather just leave it the way I have it set-up now instead of changing it around every time I want to use it for something different.

So, then the idea hits me... I have that old trailer... maybe I could refurbish it and modify it into a purpose built kayak and gear trailer that I could just leave the Kayak on. It's lighter and handier, and just rotting away anyway.

So, Saturday I hauled it out from under the pile of leaves and started taking a look.

Here's what I found so far:

Image

Image

Image

So far, all I've accomplished is to take the deck off and start looking it over, removed the fenders, cleaned them up and hit them with some Rust Converter primer and a top coat of black Rustoleum (not shown in pics). Needs new tires just because these are old and I don't trust them. Probably needs a new plywood deck and I plan to add stake panel sides all around to contain various gear. I might also add some sort of rod locker and a truck box for various things as well, and of course fab up a rack for the kayaks. Right now though I'm just trying to work out how to clean it up the best I can and repaint on the cheap as well as fix things like the wiring, tires and extending the tongue length.

Other than it being in sad shape cosmetically, I think it'll make a fine light duty trailer for a couple of kayaks and assorted fishing gear once it's cleaned up and repainted and built up a bit.


I do have a question though. Looking through this thread at all the great ideas, I see that a lot of them have the tongues extended with what appears to be a simple square tubing piece. This was my plan and it looks to be simple enough, but, measuring the coupler that is currently bolted on the trailer's tongue, it appears that it needs square tubing that measures 2.5" which isn't a standard tubing size. So what size tubing are all you guys using to extend the tongues.

This is a great thread with lots of great ideas, btw. Thanks for any advice and/or tips.

Re: Post your trailer!!!!

Posted: Thu Jun 14, 2012 8:17 pm
by kurtloup
Since I referenced this thread while gathering ideas for my trailer build, I suppose I should post a photo of the trailer I built. Everything, other than the frame, was rebuilt or replaced. I added the 8' tool boxes to store rods, paddles, stake out poles, etc. The rack above the boat holds my canoe and/or kayaks.

Kurt

Image

Re: Post your trailer!!!!

Posted: Thu Jun 14, 2012 9:42 pm
by msr
Kurt, Nice trailer but beautiful boat.

Re: Post your trailer!!!!

Posted: Sun Jun 24, 2012 5:36 pm
by JSimpson65
Here's mine - carrying a Tarpon 160.