Page 1 of 2
Airyak!!!
Posted: Tue Jun 11, 2013 8:43 pm
by mad3cker
howdy there fellow yakers i got a little project goin in the works im building a fan to put on my kayak so my question is, wood or plastic propeller and why?
opinions are much appreciated
Re: Airyak!!!
Posted: Tue Jun 11, 2013 8:48 pm
by cudagreg
just dont bring all that noise round here
Re: Airyak!!!
Posted: Tue Jun 11, 2013 8:57 pm
by texnomad
Are you talking about a propulsion fan or a keep you cool fan? A propulsion fan will require registration and numbers.
Re: Airyak!!!
Posted: Tue Jun 11, 2013 9:18 pm
by BGT
mad3cker wrote:howdy there fellow yakers i got a little project goin in the works im building a fan to put on my kayak so my question is, wood or plastic propeller and why?
opinions are much appreciated
Registration requirements aside, graphite composite and the hub is CNC machined from aerospace grade aluminum alloy would be a premium choice & cost. Wood is likely your best option. Plenty of info online, this is a pretty decent site as well.
http://www.southernairboat.com/phpBB3/v ... 85&t=41055" onclick="window.open(this.href);return false;
Re: Airyak!!!
Posted: Tue Jun 11, 2013 9:24 pm
by mad3cker
propulsion fan lol and i'll most likely put a noise reduction do-hicky on it lmao, i enjoy the quite to i'll probably only use it during the day i have 3 yaks so im doin a lil somthing on each of them, and thanks for your input and the link BGT. I'll be posting pics when i start on it
Re: Airyak!!!
Posted: Tue Jun 11, 2013 9:39 pm
by BGT
mad3cker wrote:propulsion fan lol and i'll most likely put a noise reduction do-hicky on it lmao, i enjoy the quite to i'll probably only use it during the day i have 3 yaks so im doin a lil somthing on each of them, and thanks for your input and the link BGT. I'll be posting pics when i start on it
Look forward to your build, love seeing folks innovative ideas with this sport. Think I'm just tired, first saw this thread I was thinking hovercraft .
What are you using for an engine?
Re: Airyak!!!
Posted: Tue Jun 11, 2013 9:51 pm
by texnomad
A little engineering talk here. The thrust line of the power can get high enough very easily to just roll the yak. In fishing you try to keep the rod close to the bow to prevent a side pull from causing you to turtle. The fan thrust can do the same thing, especially in a turn. Our SOT yaks are not designed to handle force thrust more than a few inches above the water line or from the sides. You might end up needing outriggers for the boat like the Adventure Island sailing rigs use. Good luck on your idea. It will be fun to follow, but I do not want to be the test pilot.
Re: Airyak!!!
Posted: Wed Jun 12, 2013 9:18 am
by WesC
Not sure how large a Prop you are thinking of using, but have you considered using Brushless Electric motors? The very same ones you would use in RC Planes? you could mount 2 on the rear of your Yak, counter rotating and have some Lipo cells in a waterproof box with controller. you honestly could be up and running for less than $300. I would recommend outrunner motors vs inrunner motors. they are lighter and have more torque. just my .02. Looking fwd to the build
Re: Airyak!!!
Posted: Wed Jun 12, 2013 10:08 am
by mad3cker
I plan on using a 25cc weedeater motor should be pushin about 8500rpm and about theturtling issue ive got that covered lol i've already started on an outriggers system with some 6in pvc this yaks is gunna be beast haha
Re: Airyak!!!
Posted: Wed Jun 12, 2013 10:13 am
by Thinwater skinner
Does anyone have pict for this thread? Sounds like a great idea but a pict is worth 1,000 words... Thanks.
Re: Airyak!!!
Posted: Wed Jun 12, 2013 5:57 pm
by mad3cker
i will post pics as soon as i get my propeller i be posting a sketch soon though
Re: Airyak!!!
Posted: Wed Jun 12, 2013 6:34 pm
by larry long shadows
Im going to make a Yak Drone..soon
Re: Airyak!!!
Posted: Wed Jun 12, 2013 9:45 pm
by kyleisMRsmiley
Annnnnnnnnd subbed to this topic
looking forward to the results.
Re: Airyak!!!
Posted: Thu Jun 13, 2013 6:50 am
by Cruisin_Cuda
would a small fan motor be too big to put on a yak? They use them on flounder boats all the time.
Re: Airyak!!!
Posted: Thu Jun 13, 2013 9:44 am
by mad3cker
I have a good size ocean yak so I don't think a small fan would be a problem just depends on the weight limit of your yak plus im building outrigers for it also so that helps to
Re: Airyak!!!
Posted: Thu Jun 13, 2013 9:47 am
by mad3cker
And is anyone plannin on going to the off road extravaganza at crystal beach this sat?
Re: Airyak!!!
Posted: Fri Jun 14, 2013 2:40 pm
by mad3cker
anything is possible with a lil redneck ingenuity lmao!
Re: Airyak!!!
Posted: Fri Jun 14, 2013 3:11 pm
by AlanC
Re: Airyak!!!
Posted: Fri Jun 14, 2013 7:12 pm
by mad3cker
hahaha that is freakin awesome man love the idea but i dont mind gettin it registered lol im tryin to get workin on it soon just on a slight budget ya know all i really need is the prop so maybe next week i'll go pick one up from the hobby store
im about to do a sketch in a few i'll post asap
Re: Airyak!!!
Posted: Fri Jun 14, 2013 7:40 pm
by BGT
Re: Airyak!!!
Posted: Fri Jun 14, 2013 9:43 pm
by mad3cker
quick sketch
Re: Airyak!!!
Posted: Fri Jun 14, 2013 11:40 pm
by RedRoaster
very cool!
Re: Airyak!!!
Posted: Sat Jun 15, 2013 10:08 am
by AlanC
Just think what you could do with a couple of these for your yak
Re: Airyak!!!
Posted: Sat Jun 15, 2013 10:17 am
by AlanC
Or if you need more power-
Re: Airyak!!!
Posted: Sat Jun 15, 2013 11:16 am
by MirrodineEC
You'll be deaf in a week even with ear plugs
Unless its a 4 stoke hhhhmmmmm...